| COMPONENTS
ANGLE
POST - 1-1/2" x 1-1/2" (Standard Duty): Used as upright
post for standard shelving units.
ANGLE
POST - 1-7/8" x 1-7/8" (Heavy Duty): When maximum
capacity and stability are essential, the heavy duty angle post is the
proper choice. Ideally suited for two level shelving, storage deck and
high rise shelving applications.
SINGLE
RIVET SHELF BEAM (Standard Duty): Primarily used as an
intermediate shelf support when maximum vertical space between levels
is needed. Furnished as standard on High Density Shelving units.
SINGLE
RIVET SHELF BEAM (Heavy Duty): Manufactured to provide maximum
capacity with very little loss of usable vertical space between
shelves.
DOUBLE
RIVET ANGLE BEAM (Standard Duty): Used to establish unit stability
and to provide shelf support on all four sides.
DOUBLE
RIVET ANGLE BEAM (Heavy Duty): Provides stability and increased
load capacity in the longer lengths.
DOUBLE
RIVET CHANNEL BEAM: Designed to provide maximum left to right
stability and higher capacity than standard or heavy duty beams.
Cannot be used at floor level.
SHELF
DECK SUPPORT: Used with double rivet beams to provide
front-to-rear support for shelf deck and provides added stability to
beams.
DOUBLE
RIVET ZEE STEP BEAMS: Reduced profile increases vertical clearance
by 1-1/4" between shelf levels when used in place of Double Rivet
Angle Beams. Protects decking edges. When used as the bottom shelf on
Single Rivet Units clear space between the bottom and first shelf is
increased by 1-1/4".
Low Profile Dourble Rivet Rack
Beam
(点击放大) |
|
.htm_txt_logo.gif){kind=logo}
